Atwood Water Heater Parts

Adjustable Thermostat 93105: It controls the temperature of the Atwood ignition water heater ranging from 110 to 150. It retrofits a front mount thermostat water heater of a RV. The product weighs 0.3 ounces and the dimensions are 8 x 5 x 0.7 inches. It is easy to install and comes with three settings A, B, C. The instructions on the thermostat are very clear. The coil springs hold the thermostat against the tank and need a 90 degree bend to prevent the spring from slipping. The temperature settings allow the user to switch from cold, to lukewarm to hot water. This thermostat works on electric water heater models. This is a long lasting replacement product from Atwood. The quality of Atwood products is unbeatable and the Adjustable thermostat comes at a very affordable price.

Flush Mount Flange: The flush mount flange gives a nice integrated look to the water heater. It recesses the water heater into the sidewalls of the RV. They are available in a wide variety of colors and sizes. They seal the edges by fitting in tightly and cover the gaps in between. Installation is easy and the flange is made of tough quality materials and is resistant to chipping and corrosion. This flush mount flange greatly reduces the chances of leakage.

Atwood Drain Plug: These drain plugs are used in the water heaters of all RV’s. The drain plugs come in packs of 2, are white in color, and are made of plastic. The drain plug weighs 1 pound and the dimensions are 5.1 x 2.9 x 0.2 inches. The plug walls are thick and require large holes for installation. The quality of the drain plugs is much superior to other cheap drain plugs available in the market. They are snug fitted, come at a reasonable price and are great quality plugs that do not need to be replaced frequently.

Door Mounting Systems: These door mounting systems are available in two sizes, 6 gallons pilot-91523, and 10 gallons pilot-93987. This utility component is installed to increase the above floor space. The mounting doors allow the water heaters to be installed below the floor and behind the baggage door. This mechanism helps in hiding the outward visible portion of the water heater so that only the exhaust gate is visible. These are well priced products and Atwood door mounting systems are reliable and durable and will last for a long period of time.

Atwood Inner Tank: The tank has a capacity of 6 gallons. It is a DSI to DSI design. The water in the inner tank can be conveniently heated with a gas or an electric system. The tank is serviceable at most RV dealerships. The inner tank increases hot water recovery (1400W heating element). The inner tank features a heating element, ECO and thermostat factory installed.

The Kit Comprises of:

• The tank
• ECO switch
• Element
• Insulation jacket
• 110V thermostat
• Junction box
• Mounting rings
• Gasket

This is a handy kit and contains all the necessary accessories. The inner tank is constructed from durable quality materials that come at a reasonable price. This is a tough and long-lasting product from Atwood. 

Fused Circuit Board- 93865 & 93851: The fused circuit boards from Atwood are well constructed keeping in mind security issues. They protect the inner lying DSI water heaters from voltage fluctuations and shorts in the electrical systems. It is a potted circuit board with a fuse.

The 93865 weighs around 1 pound and the dimensions are 4.2 x 1 x 1.5 inches. It is for gas fired tanks. The item comes complete with accessories supplied by the manufacturer. All Atwood products are known for their quality and finishing. They are constructed with the best quality materials that safeguard the underlying equipment and last for a very long time.

Atwood Water Heater Gas Control Valve or Thermostat-

Features Included:

• Type: WH/ROG
• Shank Size: 1-1/2"
• Inlet: 1/4"NPT

Thermal Cut-Off Kit 93866: The kit weighs 1.6 ounces and measures 4.4 x 0.5 x 0.5 inches. It works for all gas and electric models. A thermal Cut-off kit protects the electronic ignition water heater all kinds of damage caused due to high temperatures and heating conditions. The blockages in the burner tube should be checked before installation. An instruction manual is given for installation and repair guidance. The thermal cut off has 2 shielded thermal couplings. This is a replacement part and comes at an excellent price. The quality of the product is exceptional.