Requires only 12" depth for installation. Can be bolted to floor or welded to frame. Features non-perforated tread with anti-slip safety strips for added traction. One fluid motion to easily pull and extend the steps. Features perforated tread with anti-slip safety strips for added traction. Constructed of solid American steel and finished with a 16-step black Electronic coating. Self-storing step can be bolted to floor or welded to frame. With a 7" Riser
1220 - Width: 20" 7" Riser
1224 - Width: 24" 7" Riser
Only 15.5" H x 27.75" W x 12" D. Please note that the width of the step may vary slightly due to variance in the bar length. Finished in a black E-coat.
1236 - Width: 36" 7" Riser
like orignal steps but better
Posted by Unknown on Aug 17th 2017
Just got a professional at MidgetRV to install the steps on our HiLo camper and took him a while to cut mine off and had to use a piece of the side for a bracket but he got it on and just what I wanted as the bottom step is closer to the ground and makes it easy to get into the camper and they fold nicely . Reduces the bottom step height from the ground from 14 inches to 6 inches. I did purchase a small adjustable stand to support the first step and just have to set it up after lower the stands for the camper so it does not bounce . Highly recommenced these steps especially if you have trouble getting in the camper do to first step to high off the ground