RV Fiberglass Siding

RV Fiberglass is easily maintained compared to metal sidings because of their smooth surface. Metal sidings have a matte finish which gives them the tendency to hold on to dirt. In addition, RV fiberglass is durable due to vacuum bonding technology used in manufacturing them. Vacuum bonding technology involves the use of a-2-inch aluminum tubing which is then filled with a highly dense styrofoam that is neatly packed between the inner and outer walls.

Manufacturers are aware of the fact that while fiberglass can maintain its shape and strength in withstanding strikes by lighter objects, campers may find themselves in adverse conditions including storms or accidental impacts which might cause harm to the RV. It is for this reason that modern RV fiberglass is made with small pieces of wood to enable them to withstand the impact. Furthermore, RV fiberglass have a higher resale value compared to their metal siding counterparts because RV fiberglass doesn't acquire dents unlike metal sidings which highly attract and display dents. RV fiberglass is also a good way to save money since they increase the gas mileage of your RV truck. RV fiberglass is generally three to two times lighter compared to metal sidings thereby ensuring that the truck’s weight will support its aerodynamics. They are flexible due to air spaces that exist within the foam in their structure, this foam contains air spaces which on impact with another object, the air spaces will bulge and regain their optimum and intended shape. However, a severity should be immediately checked out and handled by an expert in order to make sure that no further damage is caused to the trailer. The big difference with RV fiberglass is if it gets damaged, you will have to replace the whole frame. At times, shipping these parts and the general expenses incurred during the repairing process might be quite costly. This is accounted for by the scarce nature of spare parts and shipping costs.

RV Fiberglass range in sizes from as low as 64 square foot to 224 square foot sheets. Other sizes include the 96 square foot, 200 square foot, 80 square foot, 128 square foot, and 160 square foot. These are the most commonly purchased sizes, however, other smaller or bigger dimensions in size are also available.

RV Fiberglass siding is resistant to moisture-related destruction since glass does not react with air. However, fiberglass sidings do react with the sun or heat in general when they are delaminated. Delamination may appear to be as small as a pebble or even as big as a quarter and grow over time and depending on how much they are exposed to the sun. Should you notice a delamination on your fiberglass sidings then make sure it is repaired as soon as possible by an experienced and competent RV repair technician. This is because if it's left unrepaired, there will be stress on the fiber tendons and this will make it crack, hence allowing through the passage of dirt, water, dust and in some cases unwanted air for trailers that are supposed to be kept airtight for research and medical purposes. Should this happen, there are only two ways to fix it before the foam in the siding is exposed. One, you may choose to apply an adhesive agent or a bonding agent at the fault point and apply pressure on it so that it retains its original shop once it has been rejuvenated to its original form. Alternatively, the camper may choose to replace the whole frame because the damage might have been extensive and hence has moved to other parts. The latter is costlier than the former hence regular inspections on your fiberglass sidings are in order. The bonding agent may be used even in cases where the camper notices a potential delamination thereby helping in avoiding the extra costs involved in a full repair. In addition to that, there are a few ways to test and see if there are any damages or blisters on your fiberglass sidings. One way to park your RV in the sun for a few hours and inspect it to see if there are any dentures on it. Mark these areas with a marker pen and check on them later once the sun has gone down. Press on them to see if they are solid or full or air. If it feels solid, then there are high chances that your fiber glass siding is damaged.